sentrol zxlcd Manual Do Utilizador

29

If your system includes wireless sensors, then you can test the strength of
signals from these sensors by performing an RF Signal Strength test.  The
strength of a signal can be affected by a low battery condition on the
sensor or changes in the environment due to furniture or appliances.

To test the signal strength of selected RF Zones:

1.

Press              .  The Control Station will display:

2.

Enter passcode:

       The Control Station will display:

3.

Press              .  The Control Station will display:

4.

Enter a number between 13 and 28 to select a wireless sensor to
test. See Protection Zones for a list of zone numbers and descriptions.

Press               . The Control Station will display one of the following:

5.

Repeat step 4 or press              to exit.

DEVICE 13
NO DEVICE

8

FOR TESTS
ENTER PASSCODE

ENTER 1-6 TO
SELECT A TEST

6

DEVICE 00
SELECT RF DEVICE

DEVICE 13
LOW SIGNAL

DEVICE 13
ACCEPTABLE

DEVICE 13
STRONG SIGNAL

CLEAR

ENTER