Panasonic SC-BT100 Guia De Utilização

RQT9161

You can enjoy TV broadcasts with this unit’s speakers.

Preparation
Confirm the audio connection to the OPTICAL IN or AUX terminal on this unit (

>

7).

1 Press [

N, O SELECT] several times to select “D-IN

§

§

This unit: Press [SELECTOR].

≥D-IN (DIGITAL IN):When connecting using OPTICAL IN terminal.

≥AUX:

When connecting using AUX terminal.

§

“(TV)” is displayed next to items set for TV SOUND input. (

>

30, Setting the TV 

audio for VIERA Link “HDAVI Control”)

≥When the system is connected to an HDAVI Control 2 or HDAVI Control 

3-compatible TV via an HDMI cable, TV broadcast audio is output through the 
system speakers if the TV input is switched to TV tuner mode. See “Setting the TV 
audio for VIERA Link “HDAVI Control” on page 30 for setting method.

≥Reduce the volume on the TV to its minimum, and then adjust the volume of this unit.

You can enhance stereo sources with surround sound effect.

ÎVS] to turn on Dolby Virtual Speaker.

If you have a 5.1ch/7.1ch speaker system (

>

4):

ÎPLIIx].

For more detailed information on this operation, please refer to the “Enjoying 
surround sound” section on page 29.

Select to suit the type of audio from the OPTICAL IN terminal on this unit.

1 Press [

N, O SELECT] several times to select “D-IN” (DIGITAL IN).

This unit: Press [SELECTOR].

2 Press [SETUP].
3 Press [

3, 4] to select “DUAL”, “DRC”, “PCM FIX” or “TV SOUND” 

4 While the selected mode is displayed

3, 4] to make the setting.

DUAL mode (Only works with Dolby Dual Mono)

M1
M2 
M1+M2 (stereo audio)

≥If this is set to “M1” or to “M2”, the PCM FIX modes (> below) will 

automatically be set to “OFF”.   

:  Adjust for clarity even when the volume is low by compressing the range 

of the lowest sound level and the highest sound level. Convenient for late 
night viewing. (Only works with Dolby Digital)

:

Select when receiving only PCM signals.

: Select when receiving Dolby Digital and PCM signals.

≥If this is set to “ON”, the DUAL mode (> above) will automatically be set to 

“M1+M2”.

: Select when receiving analogue sound from the AUX terminal.

: Select when receiving digital sound from the OPTICAL IN (TV) 

terminal.

≥Audio that is input through the OPTICAL IN terminal cannot be output through the 

HDMI terminal.

N, O SELECT]

3, 4]

ÎPLIIx]

ÎVS]

SCBT100EGEB-RQT9161-B.book  Page 19  Thursday, April 10, 2008  3:57 PM