Panasonic DP-C406 Guia De Utilização
Chapter 2 Netw
ork Configuration
5
5
Select “01 IPv4”.
6
If DHCP Default is set to “Yes”, select
“00 DHCP Default” and change the
setting to “No”, and then select “OK”.
“00 DHCP Default” and change the
setting to “No”, and then select “OK”.
7
Select “01 TCP/IP Address” and enter
the IP Address, and then select “OK”.
the IP Address, and then select “OK”.
Ex: 192.168.1.111
z
When entering a 1 or 2-digit number
segment, enter “00” or “0” in front of the
number to scroll to the next segment of
numbers. Press the “ ” key on the Control
Panel to enter a period after the number.
segment, enter “00” or “0” in front of the
number to scroll to the next segment of
numbers. Press the “ ” key on the Control
Panel to enter a period after the number.
z
To correct a mistake, select
or
to
move the cursor to the right side of the
incorrect address. Select “Clear” to delete,
and then enter the correct address.
incorrect address. Select “Clear” to delete,
and then enter the correct address.
8
Select “02 TCP/IP Subnet Mask” and
enter the Subnet Mask, and then
select “OK”.
enter the Subnet Mask, and then
select “OK”.
Ex: 255.255.255.0
9
Select “03 TCP/IP Default Gateway”
and enter the Gateway Address, and
then select “OK”.
and enter the Gateway Address, and
then select “OK”.
Ex: 192.168.1.128
10
Select “Close”.
z
The screen will return to step 5.
1
2
1
2
1
2
1
2