Panasonic DP-C406 Guia De Utilização
Chapter 2 Netw
ork Configuration
6
11
Select “03 DNS” and select “Yes” to
use DNS Server, and then select
“OK”.
use DNS Server, and then select
“OK”.
12
Enter the Host Name, Domain Name,
and DNS Server address, and then
select “OK”.
and DNS Server address, and then
select “OK”.
1
Select Host Name to enter a host name
using the Keyboard, and then select “OK”.
(Up to 60 characters)
using the Keyboard, and then select “OK”.
(Up to 60 characters)
2
Select Domain Name to enter a domain
name using the Keyboard, and then select
OK. (Up to 50 characters)
name using the Keyboard, and then select
OK. (Up to 50 characters)
3
Select IPv4, and then select “Input” to add
a DNS Server address using the Keypad.
(3 digits x 4)
a DNS Server address using the Keypad.
(3 digits x 4)
• You can set IPv6 as needed. Select IPv6, and
then select “Input” to add a DNS Server address
using the Keypad. (4 digits × 8)
For details on IPv6, refer to the Document
Management System (Device Explorer and
Embedded Web Server) of provided CD-ROM.
using the Keypad. (4 digits × 8)
For details on IPv6, refer to the Document
Management System (Device Explorer and
Embedded Web Server) of provided CD-ROM.
• You can also select the settings below as
needed.
13
Press the Reset key.
14
Turn the Power Switch OFF, and then
back ON again.
back ON again.
1
2
1
2
1
2
General Settings (Key Operator Mode)
50 User Auth. Domain
Network Settings -> 01 General -> 01 IPv4
04 WINS Server 1 IP
05 WINS Server 2 IP
06 Scope ID
07 IP Filter
08 IP Filter Mode
09 IP Filter Address
05 WINS Server 2 IP
06 Scope ID
07 IP Filter
08 IP Filter Mode
09 IP Filter Address
Network Settings -> 01 General -> 04 SNMP
03 Community Name (R)
04 Community Name (RW)
04 Community Name (RW)