Panasonic DMCZS3 Guia De Utilização
10
VQT2B94
VQT2B94
11
Names of parts
Charging battery
Always charge before first use! (not sold pre-charged)
Cursor button
MENU/SET
Left cursor button (◄)
Down cursor button (▼)
The appearance, specifications, and screen display vary depending on the model that is used. The
descriptions in this manual are primarily based on the DMC-ZS3.
1
DMC-ZS1 has only one microphone (Monaural).
2
This is not available in the DMC-ZS1.
3
The size in the DMC-ZS1 is different.
4
DMC-ZS1 does not have this button.
Tripod receptacle
Card/Battery door
Release lever
Hand strap eyelet
We recommend using
the supplied hand strap
to avoid dropping the
camera.
Mode dial
(
Shutter button
(
Camera ON/OFF switch
Flash
(
Self-timer indicator
/
AF assist lamp
Lens barrel
Lens
Lens
Zoom lever
STEREO MIC
1
(
Speaker
LCD monitor
3
Status indicator
REC/PLAY switch
(
DISPLAY button
Q.MENU
/
delete button
HDMI socket
2
AV/DIGITAL/MULTI
socket
• Always use a genuine
Panasonic AC adaptor
(optional).
• Do not use any other adaptors except a
genuine Panasonic multi conversion adaptor
(DMW-MCA1; optional).
Motion picture button
4
In this manual, the button that is used is shaded or indicated by▲▼◄►.
Up cursor button (▲)
• Multi aspect
2
Right cursor button (
►
)
About batteries that you can use with this unit (as of February 2009)
The battery that can be used with this unit is DMW-BCG10E.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of
these battery packs are not adequately protected with internal protection to
meet the requirements of appropriate safety standards. There is a possibility
that these battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of use of
a counterfeit battery pack. To ensure that safe products are used we would
recommend that a genuine Panasonic battery pack is used.
genuine product are made available to purchase in some markets. Some of
these battery packs are not adequately protected with internal protection to
meet the requirements of appropriate safety standards. There is a possibility
that these battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of use of
a counterfeit battery pack. To ensure that safe products are used we would
recommend that a genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
•
•
This camera has a function identifying batteries that can be used, and this function is
compatible with the dedicated battery (DMW-BCG10E). (Batteries not compatible with
this function cannot be used.)
compatible with the dedicated battery (DMW-BCG10E). (Batteries not compatible with
this function cannot be used.)
Battery
(model- specific)
(model- specific)
Charger (model - specific)
Charging light (CHARGE)
On: Charging in progress, approx. 130 min. (Max.)
Off: Charging complete (Disconnect charger and battery when charging is complete.)
If light is flashing: •
Off: Charging complete (Disconnect charger and battery when charging is complete.)
If light is flashing: •
Charging may take longer than normal if battery temperature is
too high or too low (charging may not be completed).
too high or too low (charging may not be completed).
•
Battery/charger connector is dirty. Clean with a dry cloth.
Connect to charger
(Ensure ‘LUMIX’ faces outwards.)
Fold out pins and
plug into electrical outlet
Indoor electrical outlet
(charge at room temperature of
10 °C - 35 °C)
(charge at room temperature of
10 °C - 35 °C)
• Do not insert
metal objects
such as clips.
(Can cause fire)
such as clips.
(Can cause fire)