Panasonic DMCZS3 Guia De Utilização

14   

VQT2B94

VQT2B94

   15

( The clock is not set when the 

camera is shipped.)

 

Pictures remaining (

Displayed when no card inserted (pictures will be saved to built-in memory)

Remaining battery (only when using battery)

(flashes red)

If the battery mark flashes red (or status indicator flashed when LCD 

monitor is off), recharge or replace battery. (P.11)

 (Card) or 

 (Built-in memory) are illuminated red.

This means that an operation is in progress, such as the recording, reading, deleting, 
or formatting of pictures. Do not turn off the power or remove the battery, card, or AC 
adaptor (optional) (this may cause damage to or loss of data).
Do not subject the camera to vibrations, impact, or static electricity. Should any of these 
cause camera operation to be terminated, attempt to perform the operation again.

 It is recommended that you copy important pictures to your computer (as 

electromagnetic waves, static electricity, or faults may cause data to be damaged).

 For model numbers and types, 

see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)

Pictures will be saved to a card if one is inserted, or to the built-in memory 

 if not.

The following SD standard-based cards (Panasonic brand recommended)
•  SD memory cards (8 MB - 2 GB)
•  SDHC memory cards (4 GB - 32 GB)

 Can only be used with devices compatible with SDHC memory cards.  
(Always read your device’s operating instructions before proceeding)

•  Cards of over 4 GB may only be used if they have the SDHC logo.

 Please reformat the card with this camera if it has already 

 If the switch on the card is set to ‘LOCK’, operations such as 

formatting, recording, and deleting cannot be performed.

 MultiMediaCards may also be used (for pictures only)

 Built-in memory is slower than SD memory card.
 ‘QVGA’ in ‘REC QUALITY’ (P.78) only can be available to record motion pictures in the built-in memory.
 Clipboard pictures (P.79) are saved to built-in memory.
 Pictures may be copied between cards and the built-in memory (P.96).

Switch 

(LOCK)

SD memory card/

SDHC memory card 

(optional)

SDHC logo

Set REC/PLAY switch to 

 before turning on power.

Press ▲▼ to select the language, and press 
‘MENU/SET’.
‘PLEASE SET THE CLOCK’ will be displayed 
when power is turned on for the first time.

Press 

‘

MENU/SET

’

Select the 

setting 

item

Select the display format

Set the 

date, 

time, or 

display.

•  To cancel → Press  .

•  Setting example of display order and time display format

[M/D/Y] [24HRS]: 12:34  APR.15.2009

[D/M/Y] [AM/PM]: PM 12:34  15.APR.2009

[Y/M/D] [24HRS]: 2009.4.15  12:34

When set to [AM/PM], 0:00 midnight is AM 12:00, 

and 0:00 noon is PM 12:00.

Press 

‘

MENU/SET

’

•  Turn on power again and check time display.

(Time and date can be displayed by pressing 

‘DISPLAY’ several times.)

REC/PLAY switch

   Failure to set the date and time will cause the date/time to be improperly printed when printing 

pictures in digital photo centre or when using ‘TEXT STAMP’ (P.88).

   Year can be set between 2000 and 2099.

   After the time has been set, the date can be printed correctly even if the date is not displayed on the camera screen.

 

 ‘WORLD TIME’ (P.66)

Select ‘CLOCK SET’ from 
SETUP menu (P.19), perform 

 and  .

•  Clock settings will be saved for 

approx. 3 months even after 
battery is removed, provided 
a fully-charged battery was 
installed in camera for the 24 
hours beforehand.