Panasonic PV-DF2703 Guia De Utilização
61
Ad
vanced Operation
vanced Operation
*Important: If a remote control button does not work when pressed, press the
, DVD button
on the remote and try the button again.
• Make settings according to amplifi er
connected to optical audio output as shown
in above table.
in above table.
*1 When connecting an amplifi er (with an
optical digital input connector) which
does not contain the Dolby Digital or
dts decoder, be sure to select “
does not contain the Dolby Digital or
dts decoder, be sure to select “
PCM
.”
If “Bitstream” is selected, starting DVD
play may cause such a high level of noise
as to be harmful to your ears and damage
the speakers.
play may cause such a high level of noise
as to be harmful to your ears and damage
the speakers.
*2 When a dts decoder is connected, please
select “Bitstream” in “dts.” If “PCM” is
selected, there will be
selected, there will be
stereo sound.
AUDIO OUTPUT
Select the digital output to be output from the optical
digital audio output connector of the unit.
digital audio output connector of the unit.
Do steps 1 and 2 on page 60.
■
“LPCM (DVD)” selections
OFF:
Linear PCM of less than 48 kHz/16 bit
is output. When playing DVDs recorded
in linear PCM of over 48 kHz/20 bit, no
digital audio is output. (Factory preset)
is output. When playing DVDs recorded
in linear PCM of over 48 kHz/20 bit, no
digital audio is output. (Factory preset)
PCM:
When playing DVDs recorded in
linear PCM of 48 kHz/20 bit/24 bit or
more, digital audio converted to 44.1
kHz/16 bit or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted
to48 kHz/16 bit or below for copyright
protection.)
linear PCM of 48 kHz/20 bit/24 bit or
more, digital audio converted to 44.1
kHz/16 bit or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted
to48 kHz/16 bit or below for copyright
protection.)
■
“Dolby Digital” selections
Bitstream: Dolby Digital bitstream (1ch-5.1ch) is
output. (Factory preset)
PCM:
When you have connected a amplifi er
that doesn’t have a built-in Dolby Digital
decoder.
that doesn’t have a built-in Dolby Digital
decoder.
■
“dts” selections
Bitstream: dts bitstream is output. (Factory preset)
PCM:
PCM:
When you have connected a amplifi er
that doesn’t have a built-in dts decoder.
that doesn’t have a built-in dts decoder.
■
“DRC (Dynamic Range Compression)”
selections
OFF:
Normal audio range is selected. (Factory
preset)
preset)
ON:
For dynamic sound even at low volume,
this is useful for late-night listening.
[Dolby Digital DVDs only].
this is useful for late-night listening.
[Dolby Digital DVDs only].
1) Press to select
an item.
2) Press SET
repeatedly for
output. (See
below.)
output. (See
below.)
1) Press to select
“AUDIO OUTPUT.”
2) Press SET to
display screen.
1
3
2
4
Press ACTION to redisplay
DVD MAIN MENU
and go to step 2 to setup another item. Or,
press ACTION three times to exit.
press ACTION three times to exit.
AUD I O OUTPUT
SELECT
:
SET
: SET
END
: ACT I ON
LPCM(DVD)
: OFF
D o l b y D i g i t a l
: B i t s t r e a m
d t s
: B i t s t r e a m
DRC
: OFF
DVD MAIN MENU
SELECT
:
SET
: SET
END
: ACT I ON
D I SC LANGUAGES
AUDIO OUTPUT
ST I L L MODE
: AUTO
TV MODE
:
4 : 3 Pa n & S c a n
Type of
amplifi er
to be
connected
amplifi er
to be
connected
Recommended setting
LPCM
(DVD)
(DVD)
Dolby
Digital
dts
No amplifi er
is connected
is connected
AV amplifi er
without Dolby
Digital/dts
decoder
without Dolby
Digital/dts
decoder
PCM
PCM*
1
PCM*
1
AV amplifi er
including
Dolby Digital
decoder
including
Dolby Digital
decoder
PCM
Bitstream
PCM
AV amplifi er
including
Dolby
Digital/dts
decoder
including
Dolby
Digital/dts
decoder
PCM
Bitstream Bitstream
*
2
SELECT
SET
ACTION