Puls UZK12.071 Battery Guia De Especificação
UZK12.071, UZO12.07
U-Series
B
ATTERY
M
ODULE
12V,
7AH
16. W
ALL
/
P
ANEL
M
OUNTING
Panel/ wall mounting is possible by detaching the DIN-Rail brackets
Fig. 16-1 Panel/ wall mounting – Removing the aluminium brackets and plastic slide
Detach the two aluminum brackets
by removing the two screws with a
Torx screwdriver (Torx 10).
by removing the two screws with a
Torx screwdriver (Torx 10).
Remove the plastic lock mechanism
by using a flat-blade screwdriver to
move the lock downwards while
pushing the plastic slide upwards at
the same time. Detach the plastic
slide.
by using a flat-blade screwdriver to
move the lock downwards while
pushing the plastic slide upwards at
the same time. Detach the plastic
slide.
Panel/ wall mounting is possible
by using either the four holes on
the rear or on the bottom of the
unit.
by using either the four holes on
the rear or on the bottom of the
unit.
Fig. 16-2 Hole pattern for wall mount
Fig. 16-3 Hole pattern for bottom mount
Jul. 2014 / Rev. 2.0 DS-UZK12.071
All parameters are specified at, 25°C ambient temperature unless otherwise noted.
All parameters are specified at, 25°C ambient temperature unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
7/9