JVC KD-R888BT Manual Do Proprietário

ENGLISH

31

General

Sound cannot be heard.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

“MISWIRING CHECK 
WIRING THEN PWR ON” 
appears.

  Turn the power off, then check to be sure the terminals 

of the speaker wires are insulated properly. Turn the 
power on again.

“PROTECTING SEND 
SERVICE” appears.

  Send the unit to the nearest service center.

Source cannot be selected.

  Check the [SOURCE SELECT] setting. (  4)

Radio

•  Radio reception is poor.
•  Static noise while 

listening to the radio. 

  Connect the antenna firmly.

CD/USB/iPod

Disc cannot be ejected.

  Press and hold   to forcibly eject the disc. Be careful 

not to drop the disc when it is ejected.

“IN DISC” appears.

  Make sure nothing is blocking the loading slot when 

you eject the disc.

“PLEASE EJECT” appears.

  Press  , then insert the disc correctly.

Playback order is not as 
intended.

  The playback order is determined by the file name 

(USB) or the order in which files were recorded (disc).

Elapsed playing time is not 
correct.

  This depends on the recording process earlier.

“NOT SUPPORT” appears 
and track skips.

  Check whether the track is a playable format. (  29)

“READING” keeps flashing.

•  Do not use too many hierarchical levels and folders.
•  Reload the disc or reattach the USB device.

“UNSUPPORTED DEVICE” 
appears.

•  Check whether the connected device is compatible with 

this unit and ensure the file systems are in supported 
formats. (  29)

•  Reattach the device.

“UNRESPONSIVE DEVICE” 
appears.

  Make sure the device is not malfunction and reattach 

the device.

“USB HUB IS NOT 
SUPPORTED” appears.

  This unit cannot support a USB device connected via a 

USB hub.

CD/USB/iPod

“CANNOT PLAY” appears.

  Connect a USB device that contains playable audio files.

The iPod/iPhone does not 
turn on or does not work.

•  Check the connection between this unit and iPod/

iPhone.

•  Detach and reset the iPod/iPhone using hard reset.

“LOADING” appears when 
you enter search mode by 
pressing 

.

  This unit is still preparing the iPod/iPhone music list. It 

may take some time to load, try again later.

Correct characters are not 
displayed.

•  This unit can only display uppercase letters, numbers, 

and a limited number of symbols.

•  Depending on the display language you have selected 

(  5), some characters may not be displayed correctly.

ANDROID

•  Sound cannot be heard 

during playback.

•  Sound output only from 

the Android device.

•  Reconnect the Android device.
•  If in [AUDIO MODE], launch any media player 

application on the Android device and start playback.

•  If in [AUDIO MODE], relaunch the current media player 

application or use another media player application.

•  Restart the Android device.
•  If this does not solve the problem, the connected 

Android device is unable to route the audio signal to 
unit. (  29)

Cannot playback at 
[AUTO MODE].

•  Make sure JVC MUSIC PLAY APP is installed on the 

Android device. (  7)

•  Reconnect the Android device and select the 

appropriate control mode. (  8)

•  If this does not solve the problem, the connected 

Android device does not support [AUTO MODE]. 
(  29)

“NO DEVICE” or “READING” 
keeps flashing.

•  Switch off the developer options on the Android device.
•  Reconnect the Android device.
•  If this does not solve the problem, the connected 

Android device does not support [AUTO MODE]. 
(  29)

JS_JVC_KD_R988BTS_K_EN_5.indd   31

9/1/2016   11:06:16 AM