JVC KD-R888BT Manual Do Proprietário

ENGLISH

How to remove the unit

When installing without the mounting
sleeve

1 Remove the mounting sleeve and trim plate from

the unit.

2 Align the holes in the unit (on both sides) with the

vehicle mounting bracket and secure the unit with
screws (commercially available).

Use only the specified screws. Using wrong screws

might damage the unit.

Installing the unit (in-dash mounting)

Do the required wiring.
( 35)

Bend the appropriate tabs to
hold the sleeve firmly in place.

Hook on the top side

Orientate the trim plate as
illustrated before fitting.

Dashboard of
your car

INSTALLATION/CONNECTION

Part list for installation

(A) Faceplate

(C) Mounting sleeve

(B) Trim plate

(D) Wiring harness

(E) Extraction key

Output terminals

For 2-way crossover setting

KD-R988BTS

REAR
FRONT
SW

:  Rear output
:  Front output
:  Subwoofer output

KD-R888BT

FRONT
REAR/SW

: Front output
: Rear/subwoofer output

For 3-way crossover setting

KD-R988BTS

REAR
FRONT
SW

:  Tweeter output
:  Mid Range output
:  Woofer output

KD-R888BT

FRONT
REAR/SW

: Mid Range output
: Woofer output

JS_JVC_KD_R988BTS_K_EN_5.indd 34

9/1/2016 11:06:27 AM