Exegin Technologies Limited Q52 Manual Do Utilizador
30
Q52 Installation and Configuration Guide © Exegin Technologies Limited, 2007
6. Q52 Zigbee PAN and Bridge Configuration
Required Zigbee Settings
Required Zigbee Settings
6
Q52 Z
IGBEE
PAN
AND
B
RIDGE
C
ONFIGURATION
This chapter describes how to configure the required and optional Zigbee Personal Area
Network (PAN) and bridge settings for the Q52. The following steps are covered:
Network (PAN) and bridge settings for the Q52. The following steps are covered:
•
•
•
•
•
•
•
•
•
•
•
•
Required Zigbee Settings
Selecting the RF Channels
The Q52 features two radio circuits, one operating in the 868-928 MHz frequency range
and the other operating in the 2.4 GHz frequency range. As shipped from the factory, the
Q52 is configured to operate on the lowest channel numbers available in each frequency
range:
and the other operating in the 2.4 GHz frequency range. As shipped from the factory, the
Q52 is configured to operate on the lowest channel numbers available in each frequency
range:
•
In North America, the 900 MHz radio is configured by default to operate on
channel 1; in Europe, it is configured to operate on channel 0
channel 1; in Europe, it is configured to operate on channel 0
•
In all markets, the 2.4 GHz radio is configured by default to operate on channel 11.
Note:
Channel 0 (868 MHz) is not authorized for operation in North America;
similiarly, Channels 1 through 10 (902-928 MHz) are not authorized for
operation in Europe. For more information, please refer to the appropriate
regulatory authority in your market area.
similiarly, Channels 1 through 10 (902-928 MHz) are not authorized for
operation in Europe. For more information, please refer to the appropriate
regulatory authority in your market area.
The Q52 must be configured to use the same radio channel(s) as the other nodes in the
local Zigbee PAN. This configuration may be performed using HTML forms.
local Zigbee PAN. This configuration may be performed using HTML forms.