Asian Express Holdings Limited 1350-R Manual Do Utilizador

4 CHANNEL FLIGHT CONTROLS (ADVANCED FLYING)

Below is a list of basic flight functions for your long-range remote control Proton™. While learning to fly

your Proton™ it is best to start in a large space until you get used to the basic controls. As you master

flying your Proton™ you can move to more advanced maneuvering techniques. Practice makes perfect!

When you have these basic steps down you can move to the next level.

Move the left Throttle stick upwards to increase the

speed of the propellers and the Proton™ will

accelerate upwards and ascend.
Move the left Throttle stick down to decrease the

speed and the Proton™ will decelerate and descend

(see diagram G).

While in the air, move the left Throttle stick left and

the Proton™ will rotate left.
Move the left Throttle stick right and the

Proton™ will rotate right (see diagram H).

While in the air, move the right Direction Stick up

and the Proton™ will move forward.
Move the right Direction Stick down and the Proton

™ will move backward (see diagram I).

While in the air, move the right Direction Stick left

and the Proton™ will bank to the left.
Move the right Direction Stick right and the Proton™

will bank to the right (see diagram J).

SWITCHING TO MEDIUM & HIGH SPEED MODE

To change the Proton™’s flight speed from the default (low speed) to medium and high speed flight mode:
1. Turn on the remote.
2. Depress the control lever on the left side straight down as if pressing a button to switch modes (see digram N).
3.  You will hear two beeps indicating that your drone speed changed to medium speed.
4.  To change to high speed mode repeat step 2.
5.  Three beeps indicates a speed changed to high speed mode.
6.  To switch back to low speed repeat step 2 again, you will hear one beep indicating low speed mode.
7. Speed mode returns to low speed once the remote is turned off.

RECOGNIZING THE FRONT & BACK OF THE PROTON™

Even though the Proton™ has four rotors, there is still a “front” or forward facing direction and "back" or

backwards facing direction. The front and forward facing direction of the Proton™ is the side with two gray

propellers (see diagram E ). The rear and backwards facing of the Quadrocopter is the side with two black

propellers (see diagram E).
NOTE: The front of the Quadrocopter displays WHITE LED lights and the back of the Quadrocopter displays

RED LED lights.

FRONT

REAR

3 CHANNEL FLIGHT CONTROLS (BEGINNER FLYING)

Below is a list of basic flight functions for your long-range remote control Proton™. While learning to fly

your Proton™ it is best to start in a large space until you get used to the basic controls. As you master

flying your Proton™ you can move to more advanced maneuvering techniques. Practice makes perfect!

When you have these basic steps down you can move to the next level.

Move the left Throttle stick upwards to increase the

speed of the propellers and the Proton™ will

accelerate upwards and ascend.
Move the left Throttle stick down to decrease the

speed and the Proton™ will decelerate and descend

(see diagram K).

While in the air, move the right Throttle stick left and

the Proton™ will rotate left.
Move the left Throttle stick right and the

Proton™ will rotate right (see diagram L).

While in the air, move the right Direction Stick up

and the Proton™ will move forward.
Move the right Direction Stick down and the Proton

™ will move backward (see diagram M).

3/4 CHANNEL SELECT

Proton™ allows you to control your micro drone in 3 channel mode (beginner) or 4 channel mode (advanced

flying). The Proton™ default setting is 4 Channel mode.
To change to 3 Channel mode:

After syncing your quadrocopter, depress and hold the control stick on the right side straight down for 3

seconds, you will hear a long beep indicating the Proton™ is now set to 3CH mode. (see digram F).
To change back to 4 Channel mode:

Depress and hold the control stick on the right side straight down for 3 seconds again, you will hear a long

beep indicating the Proton™ is now set to 4CH mode. (see digram F).

Push Down and
hold for 3 seconds