BAE Systems L1FCGX-LF Manual Do Utilizador
First InterComm
™
System Installation Guide
A29799
Page 13
November 2007
6.0
Update User Specific Parameters
The VCA100 is delivered with factory-installed default parameters. After vehicle
installation, the unit must be updated with user-specific parameters. This programming
is done using BAE Systems’ supplied VCA
installation, the unit must be updated with user-specific parameters. This programming
is done using BAE Systems’ supplied VCA
M
ANAGEMENT
P
ROGRAM
and utilities loaded
on a maintenance laptop equipped with a Buffalo Technology WLI-CB-G54HP wireless
network card.
network card.
6.1 Preparation
1. Appendix B contains instructions for operating the Serial IP and the
VCA
M
ANAGEMENT
P
ROGRAM
.
2. Record the required VCA100 User information in Table 7. This information will be
broadcast on the WiFi network.
Table 7. Required User Information
Item
Parameter
Format
User Data
1
Department Name
Up to 128 Characters.
2
Vehicle ID
Up to 128 Characters.
3 Vehicle
Type
Icon on WiFi network pulldown
menu; e.g., fire, police, ambulance.
menu; e.g., fire, police, ambulance.
4
Nickname
Up to 16 Characters
5 Bandwidth
Wide (25 kHz) or
Narrow (12.5 kHz)
Narrow (12.5 kHz)
6
Mode
Analog or Digital, pulldown menu
7
Transmit Power
High or Low, pulldown menu
8
Transmit Frequency
Numeric entry in MHz
9
Receive Frequency
Numeric entry in MHz
10
Transmit Private Line Code
Frequency or Alphanumeric
[e.g. 94.8Hz (2A)], Pulldown menu
[e.g. 94.8Hz (2A)], Pulldown menu
11
Receive Private Line Code
Frequency or Alphanumeric
[e.g. 94.8Hz (2A)], Pulldown menu
[e.g. 94.8Hz (2A)], Pulldown menu
12
VCA100 ID
Serial number on unit