BAE Systems L1FCGX-LF Manual De Usuario

™

6.0 

Update User Specific Parameters  

The VCA100 is delivered with factory-installed default parameters.  After vehicle 
installation, the unit must be updated with user-specific parameters.  This programming 
is done using BAE Systems’ supplied VCA

 and utilities loaded 

on a maintenance laptop equipped with a Buffalo Technology WLI-CB-G54HP wireless 
network card. 
 

6.1  Preparation 

1.  Appendix B contains instructions for operating the Serial IP and the

. 

2.  Record the required VCA100 User information in Table 7.  This information will be 

broadcast on the WiFi network. 

 

1 

Department Name 

Up to 128 Characters. 

 

2 

Vehicle ID 

Up to 128 Characters. 

 

3 Vehicle 

Type 

Icon on WiFi network pulldown 
menu; e.g., fire, police, ambulance. 

 

4 

Nickname 

Up to 16 Characters 

 

5 Bandwidth 

Wide (25 kHz) or 
Narrow (12.5 kHz) 

 

6 

Mode 

Analog or Digital, pulldown menu 

 

7 

Transmit Power 

High or Low, pulldown menu 

 

8 

Transmit Frequency 

Numeric entry in MHz 

 

9 

Receive Frequency 

Numeric entry in MHz 

 

10 

Transmit Private Line Code 

Frequency or Alphanumeric 
[e.g. 94.8Hz (2A)], Pulldown menu 

 

11 

Receive Private Line Code 

Frequency or Alphanumeric 
[e.g. 94.8Hz (2A)], Pulldown menu 

 

12 

VCA100 ID 

Serial number on unit