Legend Lifestyle Products Corp. T-00 Manual Do Utilizador
3
Energy savings function
The torque wrench will be turn off automatically without any buttons touching, or
inactivity over 4mins.
Changing the unit of measurement
1. Press and hold button for 4 seconds for selecting units between N.m / lbf.ft / lbf.in /
kgf.m.
2. The units of measurements on the right margin of the display will be selected in sequence
(from up to down).
3. When the desired unit of measurement is displayed, release the button.
Programming the Torque and Angle
1. Press button to switch into Torque or Angle measuring mode.
2. In order to access the torque / angle setting mode press the button for 2 seconds.
3. (a) In TORQUE setting mode: At first, " SET " is shown on the display for approx. three
seconds. After that, the display skips to the last saved torque or “ 0000 “. The first digit of
this value ( “ 0000 “ ) is flashing. Press the button to zero the last saved value.
Or by repeatedly pressing the “ “ button, the value of the flashing digit is
gradually increased. When the desired value for this digit was achieved, press the
button in order to skip to the next digit. Repeat this process for all digits. (ones,
tens, hundreds etc.)
(b) In ANGLE setting mode:At first, " SET " is shown on the display for approx. three
seconds. After that, the display skips to the last saved angle or “ 0° “.