Essence Security International ltd. ES6500EGE Manual Do Utilizador
Operation
EverGuard Express
31
3.17.7 Sending an SOS Message
If an intruder is suspected of entering the premises, the EverGuard Express panel
can be used to send SOS messages to the Monitoring Station. The SOS option
uses double key press to send an emergency message quickly and silently,
without arousing the intruder‟s attention.
can be used to send SOS messages to the Monitoring Station. The SOS option
uses double key press to send an emergency message quickly and silently,
without arousing the intruder‟s attention.
To send an SOS message:
On the number pad, press the Part Arm/SOS
and Door Lock/SOS
buttons simultaneously. Both buttons‟ LEDs light Red for 10 seconds
and an SOS message is sent, during which the LEDs flash red.
3.17.8 SOS Status
Two “status” LEDs provide the SOS status information. An audible SOS beep is
sounded to indicate acknowledgement when an SOS message is sent. The table
below details the SOS status indicators of the EverGuard Express control panel.
sounded to indicate acknowledgement when an SOS message is sent. The table
below details the SOS status indicators of the EverGuard Express control panel.
Icon
Status
SOS State initialized
Red
SOS acknowledgment
received
received
Sending SOS Message
Red
Flashing
SOS sent
No SOS
Off
Normal state or voice
verification has been
made or access timeout
finished
verification has been
made or access timeout
finished
Table 14:
SOS Status Indicators
3.18 Making a Telephone Call
You can make telephone calls using the number keys, which contain telephone
numbers you have assigned. For information on assigning the telephone numbers
to the number keys, refer to Defining Telephone Numbers for Outgoing Calls on
page 20.
numbers you have assigned. For information on assigning the telephone numbers
to the number keys, refer to Defining Telephone Numbers for Outgoing Calls on
page 20.
Note: Outgoing calls cannot be made for the EverGuard Express panel
when the EverGuard Express system is fully armed or if an alarm is in
progress.
when the EverGuard Express system is fully armed or if an alarm is in
progress.