Essence Security International ltd. ES6500EGE Manual Do Utilizador
Operation
32
EverGuard Express
To make a call:
1. Press the Call button. A good beep is sounded.
2. Using the number keys, press the key associated with the number you want
to call. The call is initiated.
3. When you are finished with the call, press the Call button again. The call is
ended.
3.19 Receiving a Telephone Call
Only calls from telephones numbers that are predefined in the EverGuard Express
panel will be accepted. For information on defining telephone numbers for
incoming telephone calls, refer to Defining the Telephone Numbers for Incoming
Calls on page 19.
panel will be accepted. For information on defining telephone numbers for
incoming telephone calls, refer to Defining the Telephone Numbers for Incoming
Calls on page 19.
To receive a telephone call:
1. When a call is incoming, a ring tone is sounded. Press the Call button. A good
beep is sounded.
2. When you are finished with the call, press the Call button again. The call is
ended.
3.20 Optional Settings and Defaults
You can configure basic parameters for the ES6500EGE, EverGuard Express
Control Panel using the Atlas Mobile and the ESI-CMS applications.
Control Panel using the Atlas Mobile and the ESI-CMS applications.
3.20.1 Atlas Mobile Application
. To configure the Control Panel:
1. On the Installation screen, roll the trackball to the Control Panel
icon.
Figure 8:EverGuard Express Control Panel
2. Click. The Installation - Control Panel screen appears displaying the
detected EverGuard Express Control Panel configuration.