Handheld Group AB 14248G Manual Do Utilizador
NAUTIZ X8 MANUAL
39
handheld
2. Bluetooth (WPAN configuration): Integrated Bluetooth v2.1+EDR
3. Phone (WWAN configuration): 3G WWAN HSPA+Module
4. GPS: Module inherent to HSPA+ Module
NOTE:
NAUTIZ X8 does not provide all Bluetooth profiles.
7.14. Connecting the Terminal to a Wireless Network
You connect the terminal to a wireless network through the on-board radio (802.11b/g/n Bluetooth and/or Phone).
Each radio has its own configuration program and requires specific information about the wireless network to
connect. Successful connection depends on your network infrastructure about which you will need specific
information from your network administrator.
connect. Successful connection depends on your network infrastructure about which you will need specific
information from your network administrator.
NOTE:
802.11 b/g/n radio module is off by default, in order to avoid wasting energy, you can switch it off using
the Wireless Communications applet
NOTE:
Suspending the terminal powers off the 802.11 b/g/n radio and drops the radio connection. When the
terminal resumes, depending on the radio power mode and security protocol selected, it may take up to
30 seconds for the 802.11 b/g/n radio drivers to re-associate the radio to the network.
30 seconds for the 802.11 b/g/n radio drivers to re-associate the radio to the network.
NOTE:
Area coverage and radio performance may vary, due to environmental conditions, access points types or
interference caused by other devices (microwave ovens, radio transmitters, etc.). If necessary, please
turn off the WALN or Bluetooth.
NOTE:
Radio performance may vary if using WLAN, Bluetooths and Phone and phone imultaneously. If
necessary, please turn off either WLAN or Bluetooth and/or Phone..
7.15. WLAN (802.11 b/g/n Radio)
TERMINAL has a 2.4 GHz 802.11 b/g/n WLAN (Wireless Local Area Network) radio that uses Direct Sequence
Spread Spectrum (DSSS) technology. The radio is interoperable with other 802.11b/g/n, Wi-Fi compliant products
including access points (APs), workstations via PC card adapters, and other wireless portable devices.
Spread Spectrum (DSSS) technology. The radio is interoperable with other 802.11b/g/n, Wi-Fi compliant products
including access points (APs), workstations via PC card adapters, and other wireless portable devices.
By default, the 802.11b/g/n radio is powered-off (i.e., disabled) “out of the box” To power it on (i.e., enable),
press the vertical arrow (bottom right corner of screen) and select Turn Wireless LAN On. The enable/disable
state of the radio will survive subsequent soft and hard resets. The next step is to configure the connection
parameters of the radio to connect to a wireless network.
press the vertical arrow (bottom right corner of screen) and select Turn Wireless LAN On. The enable/disable
state of the radio will survive subsequent soft and hard resets. The next step is to configure the connection
parameters of the radio to connect to a wireless network.
Configuring the WLAN Radio
The WLAN radio is configured in the Handheld WLAN Client, which you access by the program icon in the
command bar.
command bar.
7.16. Adding Programs from the Internet
When you have established a network connection (whether via Wireless LAN, Bluetooth, or Windows Mobile
Device Center), you can access the Internet and download additional software programs.
Device Center), you can access the Internet and download additional software programs.
When selecting programs, verify that the program and version of the program are designed for Windows