Good Life LLC UP1621 Manual Do Utilizador
also be set to “Constant” (or “Off”)
III. Alarm Sensor: When you want to use the Guardian in “Alarm” mode, a loud and audible alarm will sound off when the Motion
Sensor (B) is activated.
■
Best used to repel large pests that will easily set off the Motion Sensor
■
The sound will be audible to humans when the Frequency Dial (M) is set to any setting
■
This setting can be used for personal safety to ward off intruders (human or pest) from your property. This works best
when the Strobe Light is set to “Sensor” as well.
when the Strobe Light is set to “Sensor” as well.
■
If the sound is set to “Alarm Sensor”, then the Strobe Light must also be set to “Sensor” (or “Off”).
V -
Adjusting the Motion Sensor
The Sensor Sensitivity Dial (K) controls the sensitivity of the Motion Sensor. Numbers on the dial are
shown in meters. Not all Strobe and Sound settings use the Motion Sensor. To determine if your settings
use the Motion Sensor, refer to the list below:
Settings that use the Motion Sensor:
shown in meters. Not all Strobe and Sound settings use the Motion Sensor. To determine if your settings
use the Motion Sensor, refer to the list below:
Settings that use the Motion Sensor:
■
Strobe Setting (I) - “Sensor”
■
Sound Setting (J) - “Ultra Sensor” and “Alarm Sensor”
Settings that do not use the Motion Sensor:
■
Strobe Setting (I) - “Constant” and “Off”
■
Sound Setting (J) - “Ultra Constant”
VI
-
Adjusting the Volume Dial
The Volume Dial allows you to adjust the volume of the audible Alarm. You may need to try the dial at
several different frequency settings for optimal results.
Settings 0-4 will typically be audible to humans, while settings 5-8 should be inaudible to humans.
You will only need to adjust the Volume Dial if you are using the “Alarm Sensor” setting. Otherwise, you
may skip this step.
VII -
Adjusting the Frequency Settings
The Frequency Dial (M) allows you to choose the specific types of pests you want to repel using
our exclusive Select a Pest™ Technology. The frequency dial only applies to the “Ultra Constant”
and “Ultra Sensor” settings. If you are using the “Alarm Sensor” setting, the Frequency dial will be
deactivated.
■
You may need to try the dial at several different frequency settings for optimal results.
■
Settings 0-4 will typically be audible to humans, while settings 5-8 should be
inaudible to humans.
inaudible to humans.
The Frequency Chart (see diagram on right) can be found on the inside of the Back Cover (D) of
the unit and displays the range of the Frequency Dial in more detail.
■
Below are common pests and their suggested alternate frequency settings:
■
Squirrels – Frequency Settings 3-8
■
Insects – Frequency Setting 1 will work if you do not mind hearing the high-pitched
sound. If you would rather not hear the sound, use Frequency Settings 5-8.
sound. If you would rather not hear the sound, use Frequency Settings 5-8.
■
Bats – Frequency Settings 5-8
VIII -
Installation
The Guardian has been designed so that you can use it virtually anywhere. Choose between 2 easy installation options:
1. Place the unit on any flat surface such as counter tops, window seals, ledges, shelves, patios, and more.
2. Mount the unit using the Mounting Holes (H) on the Back Cover (D). The most common places to mount the Guardian
2. Mount the unit using the Mounting Holes (H) on the Back Cover (D). The most common places to mount the Guardian
include fences, walls, and trees.
If you are installing the Guardian outside, we recommend using it with the included Rain Jacket (F).