Qiaoxing Telecom Industry Co. Ltd. TC-STC590-595 Manual Do Utilizador

Página de 37
 
 
 
 
Preparing for Use 
Before you can use your cordless telephone, you must charge the HANDSET for 12 
hours. Failure to do so will require recharging of the BATTERY PACK more often. 
1. Place 
the 
HANDSET on the BASE UNIT for 12 hours. 
2.  After 12 hours, remove the HANDSET from the BASE UNIT. 
Before you can use your cordless telephone, you must charge the 
HANDSET for 12 hours. Failure to do so will require more frequent charging 
of the BATTERY PACK. 
NOTE:  Depending on the frequency of use, once the HANDSET  is fuly charged, it 
remains functional for approximately 4 hours of continuous use and approximately 5 
days when the HANDSET is off the BASE UNIT in STANDBY mode. 
 
Receiving Calls 
1. When the phone rings, the LCD Screen will show “RING.” If you 
have Caller ID, the LCD Screen will show the Caller ID 
information after the first ring. 
2. With the HANDSET off the BASE UNIT, press the Talk button. Start 
your conversation. The Call Timer starts to count. 
3. To end your conversation, either press the Talk button or place the 
HANDSET  on the BASE UNIT. If you place the HANDSET  on 
the BASE UNIT CHARGE CRADLE, NOTE: The Call Timer will 
start to count once you press the Talk button. 
                Minutes  
Seconds 
 
Call Timer Display 
NOTE: While the 5.8GHz frequency is inherently clearer, we suggest that you do not 
use this phone within 20 feet of a working microwave. The microwave produces 
frequencies in this range which may cause interference. This interference is normal 
for all 5.8 GHz phones and should not be considered a product defect. 
Cordless Telephone Operation 
11
TALK
   
   
02 min 08 sec