Insulet Corporation 019 Manual Do Utilizador
55
5
Or press Back to return to the previous screen.
n
Check Pod Status
To check Pod status, if the PDM is turned Off, press and hold the
Power button to display the ID screen, then press Confirm to
display the Status screen. If the PDM is On, press Back until you
reach the Status screen. (If you press and hold the Power but-
ton, you will turn off the PDM instead.) Or, from the Home
screen, press Status.
display the Status screen. If the PDM is On, press Back until you
reach the Status screen. (If you press and hold the Power but-
ton, you will turn off the PDM instead.) Or, from the Home
screen, press Status.
The PDM automatically checks the status of the Pod. The PDM
then displays the current insulin reservoir volume, PDM battery
level, last blood glucose value, last bolus dose, active basal pro-
gram, and any alarm conditions. See Chapter 6, Using the
Personal Diabetes Manager, for details of what you see on the
Status screen.
level, last blood glucose value, last bolus dose, active basal pro-
gram, and any alarm conditions. See Chapter 6, Using the
Personal Diabetes Manager, for details of what you see on the
Status screen.
If the Pod goes into hazard alarm condition and the PDM is
unable to communicate with it to turn off the alarm, you can turn
it off manually on the Pod. See the end of Chapter 10, Alerts and
Alarms, for instructions.
unable to communicate with it to turn off the alarm, you can turn
it off manually on the Pod. See the end of Chapter 10, Alerts and
Alarms, for instructions.
NEVER inject insulin (or anything else) into the
fill port while the Pod is on your body. Doing so may
result in unintended or interrupted insulin delivery.
fill port while the Pod is on your body. Doing so may
result in unintended or interrupted insulin delivery.
Figure 5-19
Figure 5-23
Once a Pod is activated and communicates with the
PDM, it can only receive commands from that PDM,
not from any other.
PDM, it can only receive commands from that PDM,
not from any other.