Amigo Technology Inc. BRF70N Manual Do Utilizador

http://www.sapido.com.tw/

 

 

            User Manual v1.0.0 

58

To identify the maxima length of packet, the over length packet will be 
fragmentized. The allowed range is 256-2346, and default length is 
2346. 

This value should remain at its default setting of 2347. The range is 
0~2347. Should you encounter inconsistent data flow, only minor 
modifications are recommended. If a network packet is smaller than 
the present RTS threshold size, the RTS/CTS mechanism will not be 
enabled. The router sends Request to Send (RTS) frames to a 
particular receiving station and negotiates the sending of a data 
frame. After receiving an RTS, the wireless station responds with a 
Clear to Send (CTS) frame to acknowledge the right to begin 
transmission. Fill the range from 0 to 2347 into this blank. 

Beacons are packets sent by an access point to synchronize a 
wireless network. Specify a beacon interval value. The allowed 
setting range is 20-1024 ms.. 

PLCP is Physical layer convergence protocol and PPDU is PLCP 
protocol data unit during transmission, the PSDU shall be appended 
to a PLCP preamble and header to create the PPDU. It has 2 
options: Long Preamble and Short Preamble. 

Inter-Access Point Protocol is a recommendation that describes an 
optional extension to IEEE 802.11 that provides wireless 
access-point communications among multivendor systems. 

Please select to enable wireless protection or not. 

Enable this function will combine several packets to one and transmit 
it. It can reduce the problem when mass packets are transmitting. 

Users can get better wireless transmission efficiency when they 
enable this function.