Amigo Technology Inc. BRF70N Manual Do Utilizador
http://www.sapido.com.tw/
User Manual v1.0.0
59
WLAN Partition
Shut down the communication between the connected
wireless LAN devices.
If you set up as "Enabled", devices connected with the
wireless LAN devices.
If you set up as "Enabled", devices connected with the
router, such as a printer, will not be able to use.
Default Setting: "Disabled"
Default Setting: "Disabled"
20/40MHz Coexist
Configure 20/40MHz coexisting scheme.
If you set up as "Enabled", "20MHz" and "40MHz" will
coexist.
Normally use as "Disabled".
Default Setting: "Disabled"
If you set up as "Enabled", "20MHz" and "40MHz" will
coexist.
Normally use as "Disabled".
Default Setting: "Disabled"
RF Output Power
Users can adjust RF output power to get the best wireless network
environment. Users can choose from 100%, 70%, 50%, 35%, and
15%.
environment. Users can choose from 100%, 70%, 50%, 35%, and
15%.
5.4.3 Security
Here users define the security type and level of the wireless network. Selecting different
methods provides different levels of security. Please note that using any encryption
may cause a significant degradation of data throughput on the wireless link.
methods provides different levels of security. Please note that using any encryption
may cause a significant degradation of data throughput on the wireless link.
There
are five Encryption types supported: “None”, “WEP”, “WPA”, ”WPA2”, and “WPA-Mixed”.
Enabling WEP can protect your data from eavesdroppers. If you do not need this feature,
Enabling WEP can protect your data from eavesdroppers. If you do not need this feature,
select “None” to skip the following setting
Item
Description
WEP
WEP is the most general encryption scheme among
wireless LAN security, configure the common encrypted
key (WEP Key) for access point and wireless LAN handset.
WEP key length are "64bit", "128bit", and "256bit" (This
product corresponds up to 128bit), larger the value is,
more the character can be set, and encryption strength will
enhanced.
* If you configure the encryption key as "5 letters in
half-width alphabets and numbers" or "Hexadecimal in 10
digits", please select "64-bit".
wireless LAN security, configure the common encrypted
key (WEP Key) for access point and wireless LAN handset.
WEP key length are "64bit", "128bit", and "256bit" (This
product corresponds up to 128bit), larger the value is,
more the character can be set, and encryption strength will
enhanced.
* If you configure the encryption key as "5 letters in
half-width alphabets and numbers" or "Hexadecimal in 10
digits", please select "64-bit".