GRAUPNER CO. LTD. 19001200 Manual Do Utilizador

Página de 28
9 / 28
S5012_Alpha_110_jh_V1
TEST VERSION, DO NOT USE FOR PRINTING
Storage
LiPo batteries should be stored with a voltage of about 3,8V per 
cell. If the cell voltage falls below 3 V, then the battery must be 
necessarily charged. Deep discharge and storage in discharge 
status (cell voltage < 3V) make the battery useless. For transport 
and storage the LiPo batteries must be placed in a safety case 
e.g. No. 8371.
Safe use of the battery charger
WARNING
 
Persons, including children, with reduced physical, sensory 
or mental capabilities, or lack of experience or knowledge, 
or not capable to use safely the charger must not use the 
charger without supervision or instruction by a responsible 
person.
 
The battery charger should be connected only to power 
sources which voltage complies with the indications on the 
label! See technical data. Risk of fire!
 
The connection socket for the battery is polarized, Never use 
force while inserting the connector . It must plug easily. 
Short-circuit and fire risk!
 
The battery charger can be used only in dry spaces.
 
The charger should always be supervised during charge and 
it should be used only in rooms fitted with a smoke detector.
 
A damaged charger or power cord must not be used until 
they are repaired by the manufacturer, his customer service 
or a suitably qualified person. Electric shock risk!
 
The charger is only suitable for LiPo batteries, it cannot 
charge other types of batteries (e.g. Nixx, LiFe, Pb). If you 
connect other type of batteries to the charger, both battery 
and charger can be damaged, risk of fire and explosions!
 
A wet charger, even if re-dried, should no longer be used. 
Risk of electric shock!
 
Due to safety and licensing reasons (CE), any unauthorized 
reconstruction and/or modification of the product is prohib-
ited. Risk of electric shock!
 
Protect the charger from dust, dirt, moisture and other for-
eign parts. It must be protected from vibration as well as 
excessive heat or cold.
 
Do not cover the charger during charge, the ventilation slots 
must be free. Risk of fire!
!