Elero USA Inc. 283200902 Manual Do Utilizador
USA-8
USA-7
US
A
Initial operation/Factory settings
Initial operation
To activate the AstroTec-915 timer, touch any button on the device.
To select the language required use the +/- buttons and confirm
your selection with the OK button. The AstroTec-915 is now in
automatic operating mode.
To select the language required use the +/- buttons and confirm
your selection with the OK button. The AstroTec-915 is now in
automatic operating mode.
Factory settings
TIME/DATE:
TIME/DATE:
– Current GMT and current date
PROGRAMME: – ASTRO W BLOCK W IDLE PERIOD (1-5)
v
06:30 HRS
b
No default idle period
IDLE PERIOD (6,7)
v
v
08:00 HRS
b
No default idle period
SETTING:
– HOLIDAY OFF
– light sensor SUN 05 sunlight value
– light sensor SUN 05 sunlight value
(if light sensor is connected)
– PROG. 1 END LIMIT, LONDON
– SUMMER/WINTER ON
– SUMMER/WINTER ON
FUNCTION:
– ROLLER SHUTTER, EXPERT MODE OFF
Note ! Press the RESET button (with a ballpoint pen or similar
object) to restore the factory settings of the AstroTec 868.
Exception: Function, language and city menu levels.
Installation
Wall bracket installation
• Before installation in the required assembly position, check that
the transmitter and receiver are functioning properly.
• Fix the bracket onto the wall with the two screws provided.
Note: Radio sets transmitting at the same frequency can lead to
interference in the reception.
It is to be noted that the range of the radio signal is
restricted by legislators and planning regulations.
restricted by legislators and planning regulations.