Mitel Deutschland GmbH 68635RFP36U-01 Manual Do Utilizador
SIP-DECT OM System Manual
326
Menu
Phonebook
RFPI
10FFF21 02
FE
PP: FP:
-dBm
50 57 50
RPN 02 01 00
PARK: 1F-10-FF-F0-21
RFP ID: 02*
RFP ID: 02*
*The ID of RFP to which the PP is currently associated to.
*The ID of RFP to which the PP is currently associated to.
Frame error
Field strength
RFP ID
In this example the DECT phone is currently connected to the RFP with the number 02. The RFPs 01
and 00 are also visible. The number “10FFF221 02” on the upper right side refers to the PARK (Example
1F-10-F2-21) of the SIP-DECT system and to the RFP to which the phone is currently connected to.
and 00 are also visible. The number “10FFF221 02” on the upper right side refers to the PARK (Example
1F-10-F2-21) of the SIP-DECT system and to the RFP to which the phone is currently connected to.
8.3.2 MITEL HANDSET AUTO CALL TEST MODE
You can switch a Mitel 600 or Mitel 142d DECT phones into “auto call test mode” with a few keystrokes.
In this mode the phone will call a specified number cyclically. You can use this feature to generate traffic
for test purposes. This mode is also active if the phone is on the charger.
1 Press the Menu soft key.
2 Enter the following key sequence “***76#” (Mitel 600 ) or “R***76#” (Mitel 142d).
3 Select Auto Call Test.
4 Press OK.
5 Enter the phone number to call.
6 Press OK.
7 Enter a number of seconds between two calls.
8 Press OK.
9 Enter a number of seconds a call shall be active.
10 Press OK. The test will be started automatically.
11 To stop the test, switch the phone off and on again.
In this mode the phone will call a specified number cyclically. You can use this feature to generate traffic
for test purposes. This mode is also active if the phone is on the charger.
1 Press the Menu soft key.
2 Enter the following key sequence “***76#” (Mitel 600 ) or “R***76#” (Mitel 142d).
3 Select Auto Call Test.
4 Press OK.
5 Enter the phone number to call.
6 Press OK.
7 Enter a number of seconds between two calls.
8 Press OK.
9 Enter a number of seconds a call shall be active.
10 Press OK. The test will be started automatically.
11 To stop the test, switch the phone off and on again.
8.3.3 MITEL HANDSET AUTO ANSWER TEST MODE
You can switch a Mitel 600 or Mitel 142d DECT phone into “auto answer test mode” with a few
keystrokes. In this mode, the phone answers incoming calls automatically. You can use this feature
together with phones in the “auto call test mode” (see section 8.3.2) for test purposes. This mode is also
active if the phone is on the charger.
1 Press the Menu soft key.
2 Enter the following key sequence “***76#” (Mitel 600 ) or “R***76#” (Mitel 142d).
keystrokes. In this mode, the phone answers incoming calls automatically. You can use this feature
together with phones in the “auto call test mode” (see section 8.3.2) for test purposes. This mode is also
active if the phone is on the charger.
1 Press the Menu soft key.
2 Enter the following key sequence “***76#” (Mitel 600 ) or “R***76#” (Mitel 142d).