Prime Electronics & Satellitics Inc. WM288P Manual Do Utilizador

 

Set up the required configuration first. Press the “Smart Connect” button. After activation 

the left button switches from “NO NETWORK” to “STARTED” mode. This means an Adhoc 

BSS has been started with SSID “AMD 802.11 MTS Network”. Now setup the required 

PAYLOAD in bytes. Next, press “START” for start test mode, whereby after starting, the 

“IDLE” button switches to “RUNNING”. Now validation over statistics is possible.

 

Note that this is a two-machine test. Start this mode on one machine and on another 

machine run the MTS test “Unicast or Multicast Frame Transmit” and see it “Joining” the 

network started by this test, that is, the “AMD 802.11 MTS Network”.