Wistron Corporation X60T Manual Do Utilizador
12.
Align the contact edge of the new Wireless WAN Card with the corresponding socket contact of the
computer.
computer.
13.
Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure
the card with the two screws. Reattach the antenna, and connect the cables to the new card.
the card with the two screws. Reattach the antenna, and connect the cables to the new card.
Note: Depending on the system configuration of your computer, the card may have only one
connector.
14.
Replace the upper case and push down on the front and sides of the upper case.
15.
Rotate the display counterclockwise 45 degrees and close it. Turn the machine over and tighten the
screws you have removed in step 7.
screws you have removed in step 7.
16.
Store the Tablet Digitizer Pen back in its slot
.
17.
Reinstall the keyboard
.
18.
Reinstall the battery
.
19.
Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on.
3/3 ページ
Replacing the PCI Express Mini Card for wireless WAN connection
2006/10/02
mk:@MSITStore:C:\Documents%20and%20Settings\KNAKA\My%20Documents\DA...