Guardian Instruments Inc. GI0011092001 Manual Do Utilizador
Guardian Instruments, Inc.
3585 County Rd. 272 #600, Leander, TX 78641 512-260-3554(phone)
512-260-3755(fax)
512-260-3755(fax)
OPERATIONS and TEST MANUAL
PN: 4952-002 Radios
Revision 1.0
PN: 4952-002 Radios
Revision 1.0
Manual for 916.5 MHz and 914 MHz Radios
Released 8/1/01
Regulatory Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning
Any modifications to this device without the express written consent of the party responsible for it’s
compliance could void the user’s authority to operate the equipment!
Power Requirements:
Input Power Requirements: 6-30 VDC
Input Current Drain: <750 ma with Relay Energized and Backlighting ON
Mounting:
Step1. Use #6 nylon screws to rigidly attach PCB assembly to mount plate. Use Locktite 242 to all
screws.
Step 2. Place the screws in the 4 mounting holes in the PCB and tighten to 5 ft-lbs.
Programming:
Step 1. Use the software provided with the board and program using MPLAB and the special
programming connector.
Step 2. Verify all programming activities using MPLAB VERIFY function.
Operation: