Netgear 13300237 Manual Do Utilizador

If you plan to use WPS, and you want to keep your wireless settings 
the same, go to the Advance Wireless Settings screen and make 
sure that the Keep Existing Settings check box is selected. See 

Push 'N' Connect (WPS) can be a quick way to automatically set up your gateway’s wireless 
network and set up your wireless computer to connect to it at the same time. WPS, also 
called Wi-Fi Protected Setup, is relatively new technology, so before you decide to use it, 
check to make sure your wireless computers and devices support WPS. Look for the 

symbol on all the computers that connect wirelessly to the gateway. 

If you do not see the 

 symbol on all the computers that connect to the wireless network, 

13). After that, you can still use WPS to set up the wireless connection for 

the computers that support WPS.

All WPS-capable products should be compatible with the gateway. 

For more information about the WPS standard, visit 

http://www.wi-fi.org

). 

Two Push 'N' Connect methods are available, WPS button and PIN (personal identification 
number).

The first time you use WPS, it assigns a random network name 
(SSID) and a random password to your wireless network. If you want 
to keep the network name and password you specified in the 
Wireless Settings screen, you must select the Keep Existing 
Settings check box in the Advanced Wireless Settings screen. See 

Any computer or wireless device that connects wirelessly to the gateway is a client. After a 

device is added as a client, it can automatically connect to the gateway.



Make sure that you know how WPS works on your computer or wireless device.