Netgear 13300237 Manual Do Utilizador

To set up the wireless network, you can enter wireless settings, (see 

16). To wirelessly connect to the gateway, a 

computer or wireless device must be configured with the same wireless settings as the 
gateway.

The default wireless network name (SSID) for the gateway is the last six digits of the WiFi 
MAC address. NETGEAR recommends that you change this name for better wireless 
security and to make it easier to recognize your network when you want to connect to it 
wirelessly.

By default the gateway works with WPA and WPA 2 wireless security. The default 
password is the 13-character device serial number.

To use Push 'N' Connect (WPS), your wireless computers and equipment must support 
WPS technology. See 

You can manually configure the wireless settings and security for both the 2.4 GHz and 
5

  GHz networks in the Wireless Settings screen. 



If you are located near the gateway, use an Ethernet cable to connect your computer to 
the gateway while you are changing the wireless settings.

If you connect wirelessly to the gateway and then change its 
wireless network name (SSID) or wireless security, you will be 
disconnected after you click Apply. 

Log in to the gateway. 

In the main menu, under Setup, select Wireless Settings.