Xplore Technologies Corp. I6205-XPL Manual Do Utilizador
Chapter 2. Using the Tablet
Using the battery
iX104C5
User’s Handbook
49
Table 4 shows the approximate time required to charge the battery
level to 100%.
level to 100%.
If you have an external battery charger
1.
Remove the battery pack (see page 49).
2.
Use the external battery charger to charge the battery.
3.
Install the battery (see page 51).
Removing and installing the battery
You can remove the battery and use an (optional) external charger to
charge it.
charge it.
Removing the battery
1.
To swap with a charged battery:
Use one of the methods described in “Suspending operation”
on page 32 to suspend operation.
If a charged battery is not available:
Save your work and close all running programs; then shut
down the computer or put the computer in Hibernation mode
(see “Suspending operation” on page 32).
(see “Suspending operation” on page 32).
Note:
To avoid losing unsaved data, wait until the computer
has completed switching to Hibernation mode before
removing the battery.
has completed switching to Hibernation mode before
removing the battery.
Table 4
Approximate battery charge time
Battery pack capacity
Charge time
Battery pack P/N
55 watt hours (7600 mAh)
1.5 hours
11-01018
68.5 watt hours (9250 mAh)
2.5 hours
11-01019