Opticon Sensors Europe BV H22-RFID Manual Do Utilizador
Opticon
H-22 User Manual
19
1.7. Installing the USIM Card
You must install a USIM card to use the phone functions of your H-22. Perform the following
procedures to install the USIM card.
You must install a USIM card to use the phone functions of your H-22. Perform the following
procedures to install the USIM card.
Note: Power off the device and remove the battery before inserting a USIM card. Make sure the
USIM card is securely positioned in the USIM socket.
USIM card is securely positioned in the USIM socket.
1.7.1.
Removing the Battery Cover
CAUTION: Make sure the device is turned off before you attempt to remove the battery cover.
Otherwise the device will shut off automatically and unsaved data may be lost.
Otherwise the device will shut off automatically and unsaved data may be lost.
Step 1:
Unlock the battery cover. Use a coin to turn the two battery cover screws counterclockwise. (See
Fig. 7.)
Fig. 7.)
Figure 7. Unlocking the Battery Cover
Step 2:
Open the battery cover by lifting the top of the cover up and off of the H-22. (See Figs. 8 and 9.)
Figure 8. Lift the Battery Cover Up
Figure 9. Lift the Battery Cover Off
.