Opticon Sensors Europe BV H22-RFID Manual Do Utilizador
Opticon
H-22 User Manual
21
1.8. Installing the Battery
The H-22 ships with a Lithium-ion battery in the box. Charge the battery fully before the first use.
Perform the following procedure to install the battery.
The H-22 ships with a Lithium-ion battery in the box. Charge the battery fully before the first use.
Perform the following procedure to install the battery.
Note: The battery can also be charged in the optional cradle.
1.8.1.
Installing the Battery
Figure 11. Install the Battery
1.8.2.
Replacing the Battery Cover
Figure 12. Align the Battery Cover
Figure 13. Lower the Battery Cover
Step 1:
Remove the battery cover. See
“Removing the Battery Cover” for
details.
“Removing the Battery Cover” for
details.
Step 2:
Insert the battery (A) into the H-22 matching the
battery contacts with the contacts inside on the left
side of the H-22 case. Press down on the right side
of the battery to secure it in place (B).
See Fig 11.
battery contacts with the contacts inside on the left
side of the H-22 case. Press down on the right side
of the battery to secure it in place (B).
See Fig 11.
Step 1:
Align the battery cover with the top of the battery bay. See Fig. 12.
Step 2:
Lower the cover in place.
Secure it by turning the battery cover screws clockwise with a
coin. See Fig. 13.