Hewlett Packard Enterprise Company AP175SDR Manual Do Utilizador

| Installation Guide

The AP-175DC requires an outdoor rated power cable to connect to a compatible DC power source.



DC power source specifications (at AP-175 interface): 12-48Vdc, 100W



DC power cable specifications (when using DC connector kit and custom cable): minimum voltage/
current rating 60V/10A, diameter 6-12mm, rated for outdoor use

1. Remove the protective cap on the power interface. 

2. Insert the power cable connector into the power interface and hand-fasten the waterproof cover. 

3. Water-proof the power cable connection with PVC insulation tape, adhesive insulation tape and strap.

Attach the solar shield to the AP-175 by using the four M4 x16 (with flat and spring washers).

Figure 25  Attaching the Solar Shield to the AP

Installation and service of Aruba products should be performed by Professional Installers.

The AP-175 does not ship with any power cables; these are available as accessories and should be ordered 

separately. In addition to completed power cables, Aruba also offers an outdoor rated AC and DC connector kit that 

can be used to connect a compatible power cable to the AP-175.