Hewlett Packard Enterprise Company APEX0100101 Manual Do Utilizador
4
AP-270 Series Outdoor Access Point
| Installation Guide
Figure 4 AP-275 Rear View
USB Console Port
The USB Micro-B console port allows you to connect the AP to a terminal or a laptop for direct local
management. Use the included USB console cable to connect the AP. You can download the necessary
driver for USB-UART adapter from
management. Use the included USB console cable to connect the AP. You can download the necessary
driver for USB-UART adapter from
support.arubanetworks.com
under the Tools & Resources tab.
Use the following setting to access the terminal:
Ethernet Ports
AP-270 Series is equipped with two10/100/1000Base-T (RJ-45) Gigabit Ethernet ports (WAN and LAN port)
for wired network connectivity. The WAN port supports 802.3at Power over Ethernet (PoE), accepting 48
VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such
as a PoE midspan injector.
for wired network connectivity. The WAN port supports 802.3at Power over Ethernet (PoE), accepting 48
VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such
as a PoE midspan injector.
These ports have RJ-45 female connectors with the pin-outs shown in
Figure 5
.
Table 3 Console Settings
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
9600
8
None
1 None
AC Power Interface
LAN Port
WAN Port
Grounding Point
USB Console Port and Reset button