Hewlett Packard Enterprise Company APEX0100101 Manual Do Utilizador

| Installation Guide

Figure 5  Gigabit Ethernet Port Pin-Out

The reset button can be used to return the AP to factory default settings. To reset the AP:

1. Power off the AP.

2. Press and hold the reset button using a small, narrow object, such as a paperclip.

3. Power-on the AP without releasing the reset button. The system LED will flash within 5 seconds.

4. Release the reset button.

The system LED will flash again within 15 seconds indicating that the reset is completed. The AP will now 
continue to boot with the factory default settings.

The AP-270 Series is capable of AC power in the range of 100 - 240 VAC. The power cord or power 
connector kit is sold separately.

Always remember to protect the AP by installing grounding lines. The ground connection must be complete 
before connecting power to the AP enclosure. 

Figure 6  AP-274 and AP-275 Top View

At the top of the AP-270 Series, the solar shield with the mounting holder is fixed onto the AP before 
shipping from the factory.

1000Base-T Gigabit 

Ethernet Port

RJ-45 Female
Pin-Out

Signal Name

1
2
3
4
5
6
7
8

BI_DC+
BI_DC-

BI_DD+
BI_DD-

BI_DA+
BI_DA-
BI_DB+

BI_DB-

Function

Bi-directional pair +C, POE Positive
Bi-directional pair -C, POE Positive

Bi-directional pair +D, POE Negative
Bi-directional pair -D, POE Negative

Bi-directional pair +A, POE Negative
Bi-directional pair -A, POE Negative
Bi-directional pair +B, POE Positive

Bi-directional pair -B, POE Positive   

Solar Shield

Mounting Holder