Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Hewlett Packard Enterprise Company
  4. APEX0102
  5. Manual Do Utilizador

Hewlett Packard Enterprise Company APEX0102 Manual Do Utilizador

Download
Página de 20
10
AP-277 Outdoor Access Point
| Installation Guide
Figure 9  
Attaching the AP to the Mounting Holder (Completed)
The inclination of the AP (mounted to the mounting holder) can be adjusted up to +/-45 degrees by 
inserting the M6x20 screw (included in the package) into the different holes on the mounting holder. 
8. Use the cable tie to fasten the cables on the bracket.
Mounting the AP to a Pole
1. Begin by attaching the mounting bracket to the pole as shown in 
Figure 10
.
a. Pass a hose clamp through the two slots on the mounting bracket, attach the mounting bracket 
to the pole and tighten the clamp using a screw driver to twist its screw head.
b. Use another hose clamp through the other two slots on the mounting bracket and tighten the 
clamp.
Figure 10  
Attaching the Mounting Bracket to a Pole
2. Use the M10x30 screw (with washer) and M10 nut included in the package to attach the mounting 
holder to the mounting bracket as shown in 
Figure 11
.