Hewlett Packard Enterprise Company APEX0102 Manual Do Utilizador

| Installation Guide

5. Insert the RJ45 connector to the Ethernet port.
6. Screw the clamping ring onto the Ethernet port.
7. Screw the sealing nut onto the clamping ring.

The AP-277 access point offers two ways to connect the unit to AC power. Two power cord variants 

are offered and a connector kit that allows the customer to assemble their own cable if the standard 

offering does not meet deployment needs.
The applicable SKUs for these options are:

The difference between the NA and INTL part variants is the color coding of the conductors. 



The North American cable uses Black (Hot), White (Neutral), and Green (Ground). 



The INTL part follows the international schema of Brown (Hot), Blue (Neutral) and Yellow/Green 

(Ground)

In all circumstances and with any outdoor infrastructure the recommended practice is to connect to 

AC mains in an order grade weather protected junction box. This needs to be implemented by a 

qualified resource in a manner that is consistent with the electrical code in force in the jurisdiction of 

deployment. In many countries this will require a licensed electrician to perform this operation.
In Japan, this would is a Certified Electrician by Ministry of Economy, Trade and Industry.
The use of plugs with infrastructure equipment is suitable only for temporary installs where nuisance 

tripping of GFI plugs is considered tolerable. Should it be desired to attach a plug to the cable 

assemblies then the installer is expected to follow all directions provided with the plug end in a 

fashion consistent with local electrical code.

The seals inside the clamping ring by factory default is applicable for cables with 5-8.5 mm diameter. In the 
cable gland kit, another seals is provided for use with the cables with 7-10 mm diameter.

CAUTION

Installation and service of Aruba products should be performed by Professional Installers in a manner that is 
consistent with the electrical code in force in the jurisdiction of deployment. In many countries this will require 
a licensed electrician to perform this operation. In Japan, this is a Certified Electrician by Ministry of Economy, 
Trade, and Industry.

The AP-277 access point does not ship with any power cables. These are available as accessories and should be 
ordered separately.

PC-OD-AC-P-NA

Weatherproof AC power cable(5m), North America version

PC-OD-AC-P-INT

Weatherproof AC power cable(5m), International (EU) version

CKIT-OD-AC-P

Weatherproof connector kit for AC power interface