Hewlett Packard Enterprise Company ARUBA52 Manual Do Utilizador
Setup & Installation
21
Chapter 2
7/29/03 FINAL DRAFT—CONFIDENTIAL
Using the Optional Mounting Kit
Use the optional mounting kit to attach the Aruba 52 to a wall, shelf, or ceiling.
N
OTE
—
Do not attach the rubber foot-pads to the Aruba 52 when using the mounting kit.
Wall, Shelf, or Solid Ceiling Mount
Attach the mounting cradle to the mounting surface.
Place the flat side of the cradle against the mounting surface. If attaching the cradle to a wall,
orient it so that the cable tie anchors are positioned at the top. If attaching the cradle to a table,
shelf, or solid ceiling, orient the cable tie anchors toward the cable route.
orient it so that the cable tie anchors are positioned at the top. If attaching the cradle to a table,
shelf, or solid ceiling, orient the cable tie anchors toward the cable route.
Use the four #6 screws (or equivalent) to secure the cradle to the solid surface. If attaching the
cradle to drywall, we recommend using appropriate wall anchors (not included) as show below:
cradle to drywall, we recommend using appropriate wall anchors (not included) as show below:
F
IGURE
2-5 Attaching the Mounting Cradle
1
S
C
AUTION
—
Do not use screws to attach the mounting cradle to a suspended ceil-
ing or other structurally weak surface. For suspended ceilings, use the T-rail clips as
described on
described on
page 23
instead.