Hewlett Packard Enterprise Company ARUBA52 Manual Do Utilizador
7/29/03 FINAL DRAFT—CONFIDENTIAL
22
Aruba 52
Part 0500007B
Installation Guide
August 2003
.
F
IGURE
2-6 Placing the Aruba 52 into the Cradle
Align the front edge of the chassis with the etched line on the mounting cradle. This will
fit the Aruba 52 mounting slots over the matching cradle posts.
fit the Aruba 52 mounting slots over the matching cradle posts.
Press and hold the Aruba 52 chassis against the retaining clips on the cradle.
Slide the Aruba 52 into place. When properly positioned, the retaining clips will spring
up to hold the chassis firmly in place.
up to hold the chassis firmly in place.
N
OTE
—
To remove the Aruba 52 from the cradle, press down on both retaining clips and
slide the chassis free of the mounting posts.
Secure the Aruba 52, if desired.
To prevent the unauthorized removal of the Aruba 52 from its installed location, use a Kens-
ington MicroSaver Security Cable (not included). Wrap the security cable around an immov-
able object, insert the cable’s lock into the Kensington Security Slot on the back of the
Aruba 52, and turn the key.
ington MicroSaver Security Cable (not included). Wrap the security cable around an immov-
able object, insert the cable’s lock into the Kensington Security Slot on the back of the
Aruba 52, and turn the key.
Orient the antennas.
For best performance, swivel the antennas so that they are oriented vertically (see
on
). Once mounting is complete, connect the required cables (see instructions on
2
READY
LAN
.A
.B
Press chassis
against clips
against clips
Align with
etched line
etched line
Slide into
position
position
A
B
C
A
B
C
3
4