Hewlett Packard Enterprise Company ARUBA70 Manual Do Utilizador
Provisioning Access Points
13
Chapter 2
3
Select the Port or Port range for provisioning.
To set the Port Range, select the first and the last ports of your range. All the ports in
between are automatically selected. (Ports have to be sequentially assigned.)
between are automatically selected. (Ports have to be sequentially assigned.)
4
Enter the required information and click Enable.The Port Range screen displays.
F
IGURE
2-2 Port Range Screen
5
Plug the AP into one of the ports configured for provisioning.
If your AP is already plugged into the port, unplug it and plug it in again.
If AP is connected through POE, enter (in interface mode)
no poe followed by poe.
The AP will come up with an IP from the provisioning subnet
After the AP comes up it should be in the provisioning list. Provisioning list shows the list
of APs which are plugged into the provisioning ports.
of APs which are plugged into the provisioning ports.