Hewlett Packard Enterprise Company ARUBA70 Manual Do Utilizador
32
Aruba 70
Part 0500044
Installation Guide
October 2004
For more port and cable details, see
.
Connecting Cables & Power
1
Connect one end of the FE cable directly to the Aruba 70 FE port.
2
Connect the other end of the FE cable to one of the following:
To a network port on the Aruba WLAN Switch, or
To a network hub, router, or switch that has a routable path to the Aruba WLAN
Switch.
Switch.
Note If the connecting device supplies POE, a straight-through cable must con-
nect the Aruba 70 directly to the powering device without any intervening
hubs, routers, or other networking equipment.
hubs, routers, or other networking equipment.
3
Connect power, if necessary.
The Aruba 70 can receive electrical power using the following options:
z
POE
If connecting the Aruba 70 to a device that supplies IEEE 802.3af compliant POE no
additional power connection is necessary.
additional power connection is necessary.
z
Power Outlet
Note
When the Aruba 70 is installed in an air-handling space, as described
in NEC (2002) Article 300.22(C), POE must be used instead of a
power outlet.
power outlet.
C
AUTION
—
To prevent personal injury or damage to equipment, be sure to
comply with electrical grounding standards during all phases of installation
and operation of the AP. Do not allow the Aruba 70 or its attachments to be
connected to or make contact with metal or power outlets on a different
electrical ground than the device to which it is connected. Also, never con-
nect the AP or WLAN Switch to external storm grounding sources.
and operation of the AP. Do not allow the Aruba 70 or its attachments to be
connected to or make contact with metal or power outlets on a different
electrical ground than the device to which it is connected. Also, never con-
nect the AP or WLAN Switch to external storm grounding sources.
A
B