Hewlett Packard Enterprise Company ARUBA70 Manual Do Utilizador

Part 0500044

Installation Guide

October 2004

2

When prompted, log in to the Aruba WLAN Switch as the administrator:

This will present you with the Aruba WLAN Switch SOE console prompt:

3

Connect to the Aruba WLAN Switch port to which the Aruba 70 is physically attached:

where slot number is the physical slot of the line card in the WLAN switch, and port number is 
the physical port.

If the AP has not finished booting, allow the Autoboot timer to expire. When the device has 
booted, the AP support prompt (

#) will appear.

This method requires that the Aruba 70 is connected to a compatible serial console using the 
Aruba serial breakout adapter (see 

 on 

1

Set up your local terminal.

This procedure requires a terminal or computer running terminal emulation software 
with the following settings:

2

Establish console communication.

Press <Enter> a few times to establish communication between the Aruba 70 and terminal.

If the AP has not finished booting, allow the Autoboot timer to expire. When the device has 
booted, the AP Support prompt (

#) will appear.

user: admin

password: <administrator password (not displayed)>

Available commands:
  baud [9600|19200|38400|57600|115200]
  connect <slot/port>
  exit (no args)
soe>

soe> 

connect <slot number>/<port number>

Table 3-2

Console Terminal Settings

9600

8

None

1

None