Hewlett Packard Enterprise Company ARUBA70 Manual Do Utilizador
42
Aruba 70
Part 0500044
Installation Guide
October 2004
AP Support
Access Levels
z
User Access
User access is a low security level, featuring only the most basic commands. It is available
without any additional login after the AP has booted.
without any additional login after the AP has booted.
z
Privileged Access
Privileged-level access requires the privileged password (the same privileged password
used on the switch) to be entered using the user level
used on the switch) to be entered using the user level
enable command. The privileged
access level is available only after the AP has successfully booted and synchronized with
WLAN switch.
WLAN switch.
User Commands
z
ping <host|IP address>
Verify IP connectivity between the AP and the host address.
Verify IP connectivity between the AP and the host address.
z
route
Display the contents of the AP route table.
Display the contents of the AP route table.
z
ifconfig
Display the AP’s IP address settings.
Display the AP’s IP address settings.
z
enable <privileged password>
Access the AP Support privileged mode.
Access the AP Support privileged mode.
Privileged Commands
In addition to the user commands, the following commands are available upon successfully
entering the privileged mode:
entering the privileged mode:
z
ps
z
show [config|stats|version]
Note
These commands should be used only as directed by Aruba
Customer Support.