Controlled Electronic Management Systems Ltd S3040RH Manual Do Utilizador
S3040-IM-0056-1.3
CHAPTER 3 : S3040 Hardware Configuration
14
8.
Enter the login details to display the Clarinet EtherUSB hub home page:
• Username: admin
• Password: password
Figure 11 Clarinet EtherUSB hub home page
9.
Select Network Settings | Device.
Figure 12 Changing the default static IP address
10. Select the Static IP option.
11. Change the IP address (as assigned by the DHCP network previously) to an address
within the AC2000 network range and change the Subnet mask, Gateway, WINS 1,
WINS 2, DNS 1 and DNS 2 to suit settings for the network that hosts AC2000.
WINS 2, DNS 1 and DNS 2 to suit settings for the network that hosts AC2000.
12. Click Apply.
13. Select Admin Settings.
14. Select the System Restart ‘Yes’ checkbox and click Apply. This saves all the modified
settings and will cause the EtherUSB hub to reboot.
15. Once reboot is complete, launch an internet browser and navigate to: http://<HUB-IP-
Address>:9876/, replacing <HUB-IP-Address> with the newly assigned IP address, to
ensure that the Clarinet EtherUSB hub home page is displayed as in Figure 11.
ensure that the Clarinet EtherUSB hub home page is displayed as in Figure 11.
Note
If the Clarinet EtherUSB hub home page does not display, there has been an error when
assigning the IP address and the previous steps should be carefully repeated.
assigning the IP address and the previous steps should be carefully repeated.
16. Connect the S3040 docking cradle to the EtherUSB hub with the USB cable.
The connection is now set up. The next step is adding the reader to AC2000 on page 21.