Redline Communications Inc. AN100UXA Manual Do Utilizador
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 100 of 136
April 19, 2010
Table 48: CLI - WmanlfBs Command
Command
Parameter/Description
saveAll
Save into non-volatile memory any changes to the SF configuration setting.
serviceClass
View or modify the wmanIfBsServiceClassTable.
add
add
add an instance to the wmanIfBsServiceClassTable
delete remove an instance from the wmanIfBsServiceClassTable
show display one or all instances in the wmanIfBsServiceClassTable
show display one or all instances in the wmanIfBsServiceClassTable
sf
View or modify the wmanIfBsProvisionedSfTable.
add
add
add an instance to the wmanIfBsProvisionedSfTable
delete remove an instance from the wmanIfBsProvisionedSfTable
show display one or all instances in the wmanIfBsProvisionedSfTable
show display one or all instances in the wmanIfBsProvisionedSfTable
ssConfig
View or modify the subscriber information.
add
add
Add Subscriber Station entry.
delete
Remove Subscriber Station entry(s).
edit
Modify an existing Subscriber Station entry.
<SsProvIndex> Table index number for Subscriber Station to edit.
macAddress
Edit MAC address of the provisioned SS.
sysName
Edit administratively-assigned name for this SS.
hostNum
Edit maximum number of hosts reachable through SS.
learningControl Enable or Disable MAC address learning:
1 -- Learning disabled, 2 --Learning enabled.
show
Display all Subscriber Station entries.
5.2.15 x509
The x509 command is used to manage privacy sublayer certificates. AN FTP server is
required to upload certificates. AN-100U/UX units shipped from the factory do not
contain any certificates. The end-user must all required certificates. Loading certificates
does not automatically enable the privacy options. Refer to section 7.3: Privacy Layer --
Encryption on page 113 for additional information.
required to upload certificates. AN-100U/UX units shipped from the factory do not
contain any certificates. The end-user must all required certificates. Loading certificates
does not automatically enable the privacy options. Refer to section 7.3: Privacy Layer --
Encryption on page 113 for additional information.
Important: When using privacy, you must obtain and load the following two X.509
certificates (availalable from your Redline Certified Partner):
certificates (availalable from your Redline Certified Partner):
Redline_Communications_Root_CA.509
Redline_Communications_Root_CA_R.509
Table 49: CLI - x509 Command
Command
Parameter/Description
x509
add
Download a certificate to the AN-100U/UX.
<Server>
IP Address of the Server where certificate is located.
<File>
Certificate file name. (i.e. *.cer or *.pem)
delete
Delete certificate(s) from the AN-100U/UX.
<Index>
Specify the certificate to remove by index number in the table. Use
'-1' to remove all certificates.
'-1' to remove all certificates.
show
Display certificates stored in the AN-100U/UX. This list displays the
index number for each certificate.
index number for each certificate.