Redline Communications Inc. AN100UXA Manual Do Utilizador

Página de 136
 
 
 
User
 
 
AN-100U/UX Base Station
 
Manual
 
 
 
70-00058-01-04 
Proprietary Redline Communications © 2010  
Page 98 of 136 
April 19, 2010 
Table 44: CLI - snmpAccCtrl 
EntryIndex: Unique index number to identify this table entry. 
Read Community Name: The SNMP community name with read access. 
Write Community Name: The SNMP community name with write access. 
Manager Address: The IP address of the SNMP manager. 
alias <alias name>  <replacement text> 
alias name: Text to be replaced 
replacement text: Text to substitute for alias 
delete <EntryIndex> [All | YesToAll] 
 <EntryIndex>         - Entry index number. 
All: Remove all the entries except the first one. 
YesToAll: Confirmation to remove all entries. 
edit  <index> <ReadCommunity> <WriteCommunity> <ManagerIpAddress> 
EntryIndex: Unique index number to identify this table entry. 
Read Community Name: The SNMP community name with read access. 
Write Community Name: The SNMP community name with write access. 
Manager Address: The IP address of the SNMP manager. 
show 
        << SNMP Access Control Table >> 
 Index: Read Access string:        Write Access string:       IP Address: 
   1    public                     private                    0.0.0.0
 
 
5.2.11  softwareConfig 
The  softwareConfig  command  is  used  to  load  new  software  binary  files  on  the  base 
station. See section 4.5.2: Software Upgrade on page 75. 
Table 45: CLI - Software Upgrade Command 
Command 
Parameter/Description 
backup
 
Save a backup copy of the base station settings on a remote FTP server. 
Server: IP Address of the FTP server. 
File
Use this name when saving the configuration backup file. 
Which: Specify the settings to be saved: 
 
 
0 - Alternate configuration. 
 
 
1 - Active configuration. 
For example:  
    backup 192.168.20.100  BS_024-061108.cfg  1  <ENTER>
 
You will be prompted by the FTP server to enter a valid username and 
password. 
restore
 
Restore the base station settings using a backup copy previously saved on a 
remote FTP server. 
Server: IP Address of the FTP server. 
File
Use this name when saving the configuration backup file. 
Which: Specify the settings to be saved: 
 
 
0 - Alternate configuration. 
 
 
1 - Active configuration. 
For example:  
    restore 192.168.20.100  BS_024-061108.cfg  1  <ENTER>
 
You will be prompted by the FTP server to enter a username and password.