Leviton Manufacturing Co. Inc. DDMX1 Manual Do Utilizador

PRELIMINARY

Leviton warrants to the original consumer purchaser and not for the beneit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for ive years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details 

  www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating 

conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and itness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and itness for a particular purpose, 

is limited to ive years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or proits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.

  

N/A

  

Maximum Fan Speed: Sets the maximum fan speed level.

   Minimum Fan Speed: Sets the minimum fan speed level.

  

Preset ON Level: Sets the turn on fan speed level regardless of  

the previous set fan speed level.

  

N/A

  

N/A

  

LED Options: Sets the time period in seconds the Locator LED  

and Brightness display will stay on before extinguishing.

  The Locator LED will blink 3 times per second to indicate Program 

Mode B-3, LED Options. To change the LED Options settings, use 

the Fan Speed Bar to move the LED to the desired preset setting 

according to the LED Options Chart. By tapping the Top of the 

Rocker this setting will automatically be saved and the device will exit 

Programming Mode B.

To enter Program Mode A:
Press and hold the TOP of the Rocker and the TOP of the DIM/BRIGHT 

Bar simultaneously for 5 seconds until the Locator LED begins to blink.

Bottom LED = LED 1

Top LED = LED 7
NOTES:

•  The device will exit programming 

mode after 3 minutes of inactivity.

•  Pressing the TOP of the Rocker at 

any time during programming will 

advance the device to the next 

programming mode.

Press the TOP half of the Fan Speed Bar – Fan speed increases to 

desired level.
DECREASE:

Press the BOTTOM half of the Fan Speed Bar – Fan speed decreases 

to desired level. If you continue to hold, the fan speed level decreases to 

the minimum level and then turns OFF.

 When the fan is OFF you can change the fan speed level that 

the fan will turn ON to using the Fan Speed Bar. If there is a power 

outage, when the power is restored, the fan speed will return to the last 

setting before the power interruption.

 The locator light will illuminate when 

the load is in the OFF position to facilitate 

access in the dark.
NOTE:

 If using the fan speed control in a 

3-way application, the fan will turn ON at the 

speed set on fan speed control bar. The fan 

can be controlled from either the fan speed 

control, the remote location or the mobile 

device app.
Push Pad (Default settings)
Turn ON from OFF position:

Tap TOP of Rocker: Fan turns ON to preset 

level.
Turn OFF from ON position:

Tap BOTTOM of Rocker. Fan turns OFF.

 Clean with a damp cloth. 

 use chemical cleaners.

 On the fan speed control only, 

engage the air-gap switch by gently pulling out 

from the bottom of the Fan Speed Bar until the 

bottom of the bar lifts completely out of the frame 

and a click is heard (refer to Figure). LED's will 

turn OFF. This will stop power to the ixture. After 

servicing is complete, press the Fan Speed Bar 

back into place for normal operation.

Tap the Google Play Store icon on your phone or go to  

http://play.google.com on your computer and follow the 

instructions to obtain the app.

Tap the App Store icon on your phone or access the app 

through your iTunes account on your computer.

Once you have downloaded the app, follow the instructions on the screen 

to pair your mobile device with your fan speed control. Once your mobile 

device is paired, use the following options to control your fan speed:
•  On - Off: Turns the fan speed control ON and OFF.

•  Schedule: Creates distinct ON/OFF events based on time and day. 

•  Sleep Timer: Sets countdown to turn fan speed control OFF.
Advanced Settings
  Device Options
  •  Hide LED Dim Bar: 

Turns LED Dim Bar OFF.

Turns Status LED OFF.

Adjusts the Sunrise/Sunset time in hours.

Adjusts the Sunrise/Sunset time in minutes.

Sets the fan speed level at which the fan turns ON.

Sets a minimum fan speed level.

Sets a maximum fan speed level.

DI-000-DDF01-02A-X0

  -  Circuit breaker or fuse has tripped.

  -  Fan is burned out.

  -  Neutral not wired to Fan Speed Control (White wire).

  -   Conirm that the device is being supplied from a 120V, 60 Hz AC 

source ONLY.

  -  Ensure that total wire length does not exceed 300 ft.

  -  Ensure wiring is correct.

•  Restore power at circuit breaker or fuse.

•  Press pad until locator light is OFF. Fan 

should turn ON. If the fan does not turn 

ON, press the TOP half of the Fan Speed 

Bar until the fan speed increases.

•  Position all wires to provide room 

in outlet wall box for device.

•  Ensure that the word “TOP” is 

facing up on device strap.

•  Partially screw in mounting screws 

in wall box mounting holes.

 Dress wires with a bend as 

shown in diagram in order to relieve 

stress when mounting device.

For warranty information and/or product returns, residents of Canada 

should contact Leviton in writing at Leviton Manufacturing of Canada 

 or by 

telephone at 1-800-405-5320.

Installation may now be completed by 

tightening mounting screws into wall box. 

Attach wallplate.

Restore power at circuit breaker or fuse. 

To pair your fan speed control with your mobile device, 

download the Leviton Decora

®

 Digital Dimmer and Timer app from the 

Google Play Store or your iTunes account. Contact Leviton’s Techline 

at 1-800-824-3005 or visit Leviton’s website at www.leviton.com for 

additional information.

This device complies with Part 15 of the FCC Rules. Operation is subject to 

following two conditions: (1) this device may not cause harmful interference, 

and (2) this device must accept any interference received, including 

interference that may cause undesired operation of the device.

This equipment has been tested and found to comply with the limits for a 

Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment OFF 

and ON, the user is encouraged to try to correct the interference by one or 

more of the following measures:

• 

Reorient or relocate the receiving Antenna.

• 

Increase the separation between the equipment and the receiver.

• 

 Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

• 

Consult the dealer or an experienced radio/tv technician for help.

Any changes or modiications not expressly approved by Leviton 

Manufacturing Co., Inc., could void the user's authority to operate the 

equipment.

The Bluetooth

®

 word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc., used under license by Leviton.

Use herein of third party trademarks, service marks, trade names, brand 

names and/or product names are for informational purposes only, are/may 

be the trademarks of their respective owners; such use is not meant to imply 

afiliation, sponsorship, or endorsement.

No part of this document may be reproduced, transmitted or transcribed 

without the express written permission of Leviton Manufacturing Co., Inc.

This product is covered by U.S. Patent No. 8,664,886 and corresponding 

foreign patents.

© 2015 Leviton Mfg. Co., Inc.

Press and hold the TOP of the Rocker and then the BOTTOM of the Fan 

Speed Bar for 5 seconds until the Locator LED and the TOP LED (LED 7) 

begin to blink.

  Maximum Fan Speed Level: The Locator LED will blink 2 times per 

second to indicate the device is in Program Mode A-2, Maximum 

.The default mode is 100% i.e. full fan speed. To 

change the fan speed level, use the Fan Speed Bar to move the 

corresponding LED to the desired discreet preset level according to 

the Maximum Fan Speed Chart. By tapping the TOP of the Rocker 

this setting will automatically be saved and the device will advance to 

the next Programming Mode, A-3, Minimum Fan Speed Level.

7

Max

5

High

3

Medium

1

Low

1

Active

Active

2

Active

Turns OFF 5 seconds after use

3

Turns OFF 5 seconds after use

Active

4

Turns OFF 5 seconds after use

Turns OFF 5 seconds after use

5

N/A

N/A

6

N/A

N/A

7

N/A

N/A

  The Locator LED will blink 3 times per second to indicate the device is in 

Program Mode A-3, Minimum Fan Speed Level. The default Minimum 

fan Speed Level is LED 2. To change the Minimum Fan Speed Level 

from 1-50%, use the Fan Speed Bar. The fan speed will relect the 

minimum fan speed level selected. By tapping the TOP of the Rocker 

this setting will automatically be saved and the device will advance to the 

next programming mode, A-4, Preset ON Level.

  The Locator LED will blink 4 times per second to indicate Program 

Mode A-4, Preset ON Level. To change the current Preset ON 

 from 1-100%, use the Fan Speed Bar. If this feature is not 

desired, press and hold the BOTTOM half of the Fan Speed Bar 

until no LED is lit (default setting). By tapping the TOP of the Rocker 

this setting will automatically be saved and the device will exit 

Programming Mode A.

This device complies with Industry Canada licence-exempt RSS 

standard(s). Operation is subject to the following two conditions: (1) 

this device may not cause interference, and (2) this device must accept 

any interference, including interference that may cause undesired 

operation of the device.

If your fan speed control is not responding, or you are unable to control 

it after you have tried to Pair/Connect to it multiple times, it may be 

necessary to reset the fan speed control to its original factory settings. 

To accomplish this, proceed as follows:
On the fan speed control, hold the TOP of the rocker until the locator LED 

starts to blink. The fan speed control is now reset. Once the fan speed 

control is reset, it may be necessary to re-pair with the your application.