Gemalto M2M GmbH ALS1-US Manual Do Utilizador
Cinterion
®
ALS1-US Hardware Interface Overview
7 Reference Approval
31
ALS1-US_HIO_v01.000
2013-08-14
Confidential / Preliminary
Page 30 of 34
7
Reference Approval
7.1
Reference Equipment for Type Approval
The module (i.e., the evaluation module) is connected to the DSB75 by means of a flex cable
and a special DSB75 adapter. The GSM/UMTS/LTE test equipment is connected via edge
mount SMA connectors soldered to the module’s antenna pads.
For ESD tests and evaluation purposes, it is also possible connect the module to the GSM/
UMTS/LTE test equipment through an SMA-to-Hirose-U.FL antenna cable and the SMA anten-
na connectors of the DSB75 adapter.
A further option is to mount the evaluation module directly onto the DSB75 adapter’s 80-pin
board-to-board connector and to connect the test equipment as shown below.
Figure 8:
Reference equipment for type approval
DSB75
Standard
80 polig Flex
PC
GSM /UMTS/LTE
test equipm ent
GSM /UM TS/LTE
USB
cable
Power
supply
Power
GND
USB
ANT3
ANT2
ANT1
Audio
Uranus
Audio
DSB75 adapter
SIM card
holder
Evaluation
m odule
Edge mount SMA connectors
manually soldered to antenna pads
Detail:
SMA
to H
irose
U.FL
cable
UM TS/LTE Rx Diversity/
M IM O
Evaluation
module